Expert Answers about Trailer Hitch Ball

• How are Hitch Balls Secured to Mount on Flash Solid Steel Adjustable Ball Mount
• I reached out to the manufacturer who said the hitch balls on the Flash Solid Steel Adjustable Ball Mounts are a solid piece that has a bolt running through it inside the mount. What this means is that there is zero chance of it coming apart while you are towing your trailer. Simply abide by the capacities of the hitch and it is extremely safe. There are a number of Flash Solid Steel Ball Mounts, each of which comes with a 2" and 2-51/6" hitch balls and the correct one for your needs will...
  view full answer...


• What is the Country of Origin for Curt Trailer Hitch Ball # C40030
• The Curt trailer hitch balls are all made in China. Many trailer hitch receivers too are made outside the U.S. but Curt does manufacture their hitches stateside. The 2-5/16-inch hitch ball you referenced, Curt # C40030, has a 15K gross trailer weight capacity. For a comparably-rated 2-5/16-inch chrome-plated ball that is made here in the U.S. you can use B&W part # BWHB94004. This is rated for 30,000-lbs. Its shank is 1-1/4-inches in diameter and 2-1/2-inches long.
  view full answer...


• Is The Hitch Ball Welded To The Mount Plate On the Reese Above-Bed Gooseneck Trailer Hitch #RP58079?
• The Reese Above-Bed Gooseneck Trailer Hitch - 25,000 lbs, # RP58079, has a 2-5/16 inch hitch ball that is held in place with a snap ring. This design allows the hitch ball to rotate reducing binding with the gooseneck coupler. It has a nice powder coat finish to resist corrosion and the hitch ball is a durable, heat treated ball. If you are looking for a welded option, you may be interested in the Curt 25K Gooseneck Plate for Fifth Wheel Rail item # 16055, or the Curt Spyder Gooseneck...
  view full answer...


• Trailer Hitch Made in USA and Wiring Recommendation for a 2016 Subaru Outback
• Draw-Tite trailer hitch # 75673 for the 2016 Subaru Outback is made in Mexico. Curt trailer hitch # C13206, also for your 2016 Subaru Outback, is made in the USA. But, per Curt warranty requirements, all non-trailer loads (bike racks, cargo carriers, etc) must be supported by stabilizing straps, such as # 18050, sold separately. So if you are going to be using the hitch for anything other than towing you would need the strap. If you are going to do some towing I recommend etrailer ball...
  view full answer...


• Where is Brophy Chrome 2 Inch 7,500 Pound Hitch Ball # CB26C Made
• Yes, the Brophy trailer hitch ball # CB26C is made in the USA. Brophy has several options that are made in the USA. And they also have some that are not. But this one is.
  view full answer...


• Origin for Curt Trailer Hitch # 13542 for a 2006 Ford Freestyle
• The Curt trailer hitch # 13542 for the 2006 Ford Freestyle is made in the US. I have included a link to the installation instructions for you. If you plan on doing some towing, I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip and a carrying bag. For trailer wiring use # 118395. I have included some instruction and video links for the wiring as well.
  view full answer...


• Is the Finish on the Tow Ready Trailer Hitch Ball # 63853 Shiny or Dull
• I went out to the warehouse and pulled a Tow Ready Trailer Hitch Ball, # 63853, to check the finish on it. It is a polished stainless steel so it is shiny. I have added a picture I took of the ball so you can see. It is shiny enough to where if you look closely, you can see the reflection of the camera.
  view full answer...


• Is Curt Trailer Hitch Ball A-82 Solid Stainless Steel
• Curt trailer hitch ball # A-82 is stainless throughout. When a ball or other part is plated or coated we do make sure to point that out in the description and/or the title. Also the price is a dead giveaway since stainless is more expensive. A ball with the same rating and measurements from the same manufacturer only in chrome, # C40018, costs 3 times less!
  view full answer...


• Is the Class III Curt Trailer Hitch for a 2011 Toyota Tundra Made in America
• The Curt Trailer Hitch # 13198 for the 2011 Toyota Tundra is made in the U.S.A. I have included a link to the installation details and a link to a video showing a typical installation for you. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
  view full answer...


• Does Curt Class I Ball Mount # C45024 Have a Solid or Hallow Shank
• Class I and II 1-1/4 in hitch accessories are almost exclusively solid-shanked across the board. That would include ball mounts like # C45024. Just to be sure, I did contact Curt and they verified that ball mount # C45024 does have a solid shank. For Class I and II trailer hitches you need to use the ball mount specified by the trailer hitch manufacturer in order to not void the warranty. Or you can ask the hitch manufacturer if this ball mount is acceptable and will not void the warranty....
  view full answer...


• Where Is etrailer Trailer Hitch Receiver e78KR For 2005 Honda Element Manufactured?
• The etrailer Trailer Hitch Receiver # e78KR you were looking at for your 2005 Honda Element is made in the USA, but the mounting hardware may be imported. The etrailer hitch has a 350lb tongue weight rating and 3500lb trailer weight rating and an attractive black matte finish. If you are planning on towing with your Element you will also need a vehicle wiring harness # C59236 and a hitch ball, ball mount, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900. I...
  view full answer...


• Adjustable Ball Mount for 2-1/2 Inch Hitches made in the USA
• Curt trailer hitches are manufactured in the USA but not the supplemental parts like ball mount # C45902. For one that is made in the USA and is similar I recommend # BWTS20037B. But it maxes out at 18K with the 2-5/16 inch ball. The Curt model # C45902 is the only option we have in an adjustable ball mount for 2-1/2 inch hitches that can reach 20K. For a few dollars more you can get the tri-ball model # BWTS20048B. I have linked a video of it for you.
  view full answer...


• Will a Trailer Hitch Ball with a Raw Finish Last as Long as a Ball with a Chrome Finish
• A chrome finish ball is going to look good but it will not be corrosion resistant. A ball with a machine finish like # C40041, is going to have about the same corrosion resistance. In terms of performance they will wear at about the same rate under normal use. The best balls in terms of corrosion are going to be stainless steel followed by zinc coated balls. But in terms of balls that have a 30,000 pound capacity and a 1-1/4 inch shank, ball # BWHB94004 or # C40085 are the only options....
  view full answer...


• Does Black Powder Coat Come Off BulletProof Hitches Ball Mount HD258
• The black powder coat is designed to last so it isn't going to immediately rub off and have scratches after use of the hitch you asked about: - BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch - 8" Drop/Rise # HD258 While over time there will be some normal wear, the powder coat on BulletProof Hitches, including # HD258, is designed to last and is actually warrantied for a full year after purchase from any defect. Additionally, you can use touch up paint for the powder coat...
  view full answer...


• Is Shank On Fastway Self-Locking Adjustable 3-Ball Mount for 2-1/2 Inch Receiver a Single Piece
• The Fastway Self-Locking Adjustable 3-Ball Mount # DTALBM6625-3S referenced in your question does feature a steel sleeve over the ball mount shaft that allows it to be used in a 2-1/2 inch receiver hitch. The sleeve cannot be removed and it does not compromise the strength or integrity of the ball mount itself. This unit includes three stainless steel hitch balls (1-7/8 inch, 2 inch and 2-5/16 inch) and has a tongue weight capacity of 1,000 pounds. I have attached a video demonstration...
  view full answer...


• What is the Shipping Weight of the Draw-Tite Max-Frame Trailer Hitch Reciever
• The shipping weight on the Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is 37 lbs. If you are planning on towing or carrying a bike rack, I would be happy to recommend a bike rack, trailer wiring, ball mount, and tow ball if you can let me know how you intend to use your hitch. Included is an installation video for this hitch on a 2019 Subaru Crosstrek.
  view full answer...


• American-Made Trailer Hitch for 2012 Acura MDX
• I'd recommend the Curt Class III Trailer Hitch, part # 13354. Curt manufactures their hitches in the USA. Draw-Tite is an American owned company, but their hitches are manufactured in Mexico. If you'll be using the hitch for towing purposes, you'll need a few more parts to complete your towing system: Trailer wiring harness with 4 pole trailer connector, part # 118424 Ball mount, part # 2923 Trailer ball, part # 19261 for a 1-7/8 inch or # 63845 for a 2 inch.
  view full answer...


• Are Hitches Available for a 2008 Volvo XC90 Made with Square or Round Tube
• All the hitches we offer for your 2008 Volvo XC90 use square tube construction. No drilling, trimming or vehicle modification will be required, the hitch bolts to existing holes in the vehicle. The nice thing about the design of the hitch is that the cross tube is concealed behind the bumper, so the receiver tube is the only visible portion of the hitch. The two hitches available are pretty similar, visually speaking but the Draw-Tite # 75152 has a higher tongue weight capacity (maximum...
  view full answer...


• Where is Brophy 2 Inch Stainless Steel Hitch Ball Made
• Brophy hitch ball # SC23-C is made overseas. For a stainless steel option that is made in the US you would have to go to an interchangeable set, # 903B. I have linked a video review of this set for you.
  view full answer...


• Domestically Manufactured Hitch for 2016 Ram ProMaster 1500
• Draw-Tite manufactures their receiver hitches in Mexico. If you'd prefer something manufactured in the USA, Curt offers a similar hitch as part # C13295. If you need a trailer wiring harness but you already have the factory tow package, you'd use # HM40975 or # 22112 if your ProMaster doesn't have the tow package. For a ball mount, use # C45030 and for a 1-7/8 inch ball use # 19260 or # 63845 for a 2 inch ball. Then you will need a pin and clip like # PC3. I've linked you to some installation...
  view full answer...